Axminster AWVSWL1200D 사용자 설명서

{카테고리_이름} Axminster AWVSWL1200D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster AWVSWL1200D 19 페이지. Woodturning lathe

AWVSWL1200D

Woodturning Lathe

Code: 502517

This is a very capable machine aimed at the more experienced woodturner, offering

a high capacity of 1200mm(47") between centres and 450mm(18") diameter over

the bed. The motor is an inverter controlled, DC permanent magnet unit of 1.5kW

(2hp), combined with the 2 speed belt drive gives very high torque at the low

speeds plus a high speed of 3200rpm for smaller work, or finishing. All the controls

are grouped together on the front face of the headstock for convenience, along

with a digital read-out of the spindle speed. The spindle direction is easily reversed

with a simple toggle switch. Other features include the positioning of the headstock

anywhere along the bed, a spindle indexing facility at 10 degree intervals, camlock

action toolrest banjo and tailstock and a lock-off NVR switch. Supplied with

150mm(6") faceplate, Axminster 2MT drive centre, Axminster 2MT live tailstock

centre, indexing pins, 350mm(14") tool

Axminster Tool Centre,

Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH

www.axminster.co.uk

rest and centre

knock-out bar.