Axminster CSC500C 사용자 설명서 - 페이지 6

{카테고리_이름} Axminster CSC500C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster CSC500C 8 페이지. Woodturning chuck set

Jaw Capacity Chart...

Select the appropriate jaw for your project. Place the selected jaw on top of the carrier,

matching the number stamped on the main body to the number on each individual jaw. Using

the provided hex wrench, firmly tighten the jaw down onto the surface of the carrier with the

hex screws. Repeat this step for the remaining three jaws.

1. Wipe the inside of the threads and the outside of the adapter to insure both surfaces are

clean.

2. Use the furnished 3/4"xl6tpi adapter if necessary.

3. Hold the chuck in your hand, screw and tighten the adapter into the bottom threaded

portion of the chuck.

www.axminster.co.uk

Chuck

Adapter