Axminster CSC500K 사용자 설명서 - 페이지 6

{카테고리_이름} Axminster CSC500K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster CSC500K 8 페이지. Key operated woodturning chuck set

Jaw Capacity Chart...

Jaws Style

1 Set (4 pieces) gripper jaws

1 Set( 4 piece) extended pin

jaws

1 Set (4 piece) step jaws

1 Set (4 piece) Internal &

external gripper jaws

Select the appropriate jaw for your project. Place the selected jaw on top of the carrier,

matching the number stamped on the main body to the number on each individual jaw. Using

the provided hex wrench, firmly tighten the jaw down onto the surface of the carrier with the

hex screws. Repeat this step for the remaining three jaws.

1. Wipe the inside of the threads and the outside of the adaptor to insure both surfaces are

clean.

2. Use the furnished 3/4" x l6tpi adaptor if necessary.

3. Hold the chuck in your hand, screw and tighten the adaptor into the bottom threaded

portion of the chuck.

www.axminster.co.uk

Gripping Dowel

Outside Diameter

7/8" to 1-1/2"

1/4" to 1"

1/16" to 13/16"

2-1/4" to 2-7/8"

Gripping in Hole

Inside Diameter

1-3/8" to 2"

7/8" to 1-5/8"

Step 1: 5/8" to 1-5/16"

Step 2: 1-3/16" to 1-7/8"

2-5/8" to 3-1/4"

Chuck

Adaptor