Axminster RTC7030 사용자 설명서 - 페이지 4
{카테고리_이름} Axminster RTC7030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster RTC7030 16 페이지. 305mm & 750mm sheet metal workers
General Safety Instructions...
W
A X M I N S T E R
W H I T E
Good Working Practices/Safety
The following suggestions will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain your tools and
equipment in good working order.
!
• Mount the machine on a flat level bench or surface. Secure the machine to the surface where
applicable.
• Always use machines in an uncluttered area. To reduce the risk of accidents, avoid leaving
materials or other items within the working area and allow clear access to all machine parts
and controls.
• Clean machines by wiping with a oily rag. Do not use solvents or cleaners that may
cause damage to painted/coated surfaces.
• When storing or leaving the machine for any length of time, spray bare metal surfaces
with a protective spray to minimise surface corrosion.
• Before using the machine, ensure that all locking-nuts, chucks etc, are tightened and
secure. Check that all loose keys, spanners etc. have been removed.
• Always ensure that long hair is tied back or retained by a band, hat or safety helmet. Remove all
loose jewellery to prevent it from catching in rotating machinery.
• Always check that the correct machining or cutting speed has been selected.
• Do not operate machine when tired or under the influence of alcohol, drugs or certain medicines.
• WHEN USING THE MACHINE ALWAYS WEAR THE APPROPRIATE EYE PROTECTION, EAR
DEFENDERS AND DUST OR FUME INHALATION PROTECTION.
Specific Safety Instructions...
• Ensure that the machine is bolted firmly to a workbench before starting work.
• Keep fingers away from the rollers, the bending dies and the shearing blades.
• Do not wear loose clothing which might get drawn into the machine.
• Keep the top cover closed when the rollers are not in use.
03
WARNING!!
www.axminster.co.uk
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
!