Alphacom a200 사용자 설명서 - 페이지 11

{카테고리_이름} Alphacom a200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphacom a200 15 페이지. Range telephone

10.

Operating Procedures

10.1

To redial the last number manually dialled:

Lift handset, listen for dial tone

press redial button

10.2

up to 20 telephone numbers each consisting of a maximum of 24 digits (including

pauses or change of dial mode instruction) may be stored in memory. numbers may also

be stored when you are actually in the process of making a call and using the handset or

headset. To store a number, please adopt the following procedure:-

Ensure that the telephone is plugged into the telephone socket, and that the memory

protection switch is positioned to the left. Lift handset.

press STORE button once.

Enter the telephone number to be stored.

press the STORE button again.

press desired memory location button.

To protect the number stored ensure the memory protection switch is positioned to

the left.

10.3

To dial a number from memory, lift handset, await dial tone and press button

corresponding to memory location require.

10.4

During a dialling or memory programming sequence, pressing pAuSE will automatically

insert a 4 second delay between the digits dialled, before and after pressing the pAuSE