Alphacom a300 사용자 설명서 - 페이지 14

{카테고리_이름} Alphacom a300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphacom a300 20 페이지. Range headsetphone

14.5

AUTO REDIAl FEATURE

If the telephone number you have called is engaged and you want to keep

on dialling until the call is answered.

1. press Speaker button to get the line, the LED indicator will illuminate.

2. press the Auto Redial button, the dialled telephone number will be

automatically dialled out.The dialled number will blink on the display and

the line status can be monitor through the Speaker during 30 seconds

waiting period.

3. If the call is answered during 30 seconds waiting period, you can answer

the call by lift up the Handset or press any key on the telephone except

Speaker button to use Handsfree operation.

4. If the call is not answered during 30 seconds, the line is disconnected

by 30 seconds break period. During the 30 seconds break period, the

telephone number will show steadily on display and the Speaker button

indicator will turn off.

5. After the 30 seconds break period, the telephone number will be

automatically dialled out again as described in step 2.

6. The Auto Redial process will be repeated for 10 times until the call is

answered or you can terminate the function by pressing the Speaker

button during the break period as you wish.

7. Auto Redial can also work in headset mode. By pressing the headset

10:42

Page 13

button first to get the line then pressing the auto redial button.The

operation is similar to that in handsfree mode

14.6

Up to 20 telephone numbers each consisting of a maximum 24 digits

(including pauses or change of dial mode instruction).

Alternatively you may store 10 telephone numbers plus 10 access codes for

Network Services which your service provider has enabled.

Two banks of memory are provided, labelled 1-10 and 11-20 (the

appropriate bank being selected by pressing the SHIFT button and symbol

will show on display).

To store a number, please adopt the following procedure:-

1. Ensure the Memory protection Store switch is positioned to the left.

2. Seize the line in any mode.

3. press STORE button once, and the symbol "E" shows on display.

4. Key in the telephone numbers you want to store.

5. press SHIFT button if upper memory location are required.

6. press desired memory location button.

7. Release the line from any mode.

8. To protect the number stored ENSURE that the Memory protection

Store switch is positioned to the right.