Alphacom 32 사용자 설명서

{카테고리_이름} Alphacom 32에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphacom 32 4 페이지.
Alphacom 32에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)

INTRODUCTION The Alphacom 32 printer gives a permanent record of anything your

Sinclair ZX81™, or Sinclair Spectrum™ can display on the TV screen.

Supplied with the printer are 1) User Manual, 2) one roll of thermal paper and 3) a power

supply unit.

DESCRIPTION Your printer is enclosed in an extremely tough ABS plastic molded case

which is highly resistance to impact damage. The transparent paper cover is also made of

ABS. The fine matte case finish requires no special care, and should be cleaned, if necessary,

by wiping it with a slightly damp cloth. Do not use any type of wax cleaner.

Figure 1 illustrates the major components of the printer. The paper cover (1) is hinged to

permit a roll of paper to be loaded and positioned.

Pressing the ON/ADVANCE button (2) places the printer in the printing mode and

advances paper as long as it is held down. See selection on SELF-TEST mode for additional

functions of the ON/ADVANCE button. Pressing the OFF button (3) takes the printer out of

the printing mode. It also starts and stops SELF-TEST mode described later in this manual.

Note: The OFF button does not turn the line power off and on.

Ventilation slots are provided in the top and bottom covers for convection cooling of the

internal components. The printer should always be placed on a hard surface so the cooling

vents will not be obstructed in any way.

ALPHACOM 32

USER'S MANUAL