Axminster BS100 매뉴얼 - 페이지 12

{카테고리_이름} Axminster BS100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster BS100 17 페이지. Belt sander

5.2.2 Installation

The machine is delivered in a wooden case. The machine should be placed on a level

groundsill or table and secured by four bolts (M10).

5.2.3 Connection of electrical suppl

We recommend using cable of at least H07RN 1.5mm

should also provide a fuse with rated current of 10A in the supply circuit. Set up the

electrical connections according to the attached electrical drawing.

The machine should be installed in a workshop, which has proper lighting, no

contamination and good ventilation condition.

- Ensure safety, secure and solid installation.

- Electrical installation must be done by professional electrician.

-.Make sure the protector earth lines of the machine are connected reliably

Connect back dust collection outlet to dust extrusion system.

Connect front dust collection outlet to proper container or bag. When dust in the bag is

more the half of the capacity of the collection bag, please stop the machining process and

clean the bag in time.

Fig. 5-1 Min. installation space

Fig. 5-2 Installation dimensions

12 / 16

to connect with the plug. The user