Axminster Hobby Series 사용자 설명서 - 페이지 6

{카테고리_이름} Axminster Hobby Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Hobby Series 13 페이지. Scroll saw
Axminster Hobby Series에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (20 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

Ridge

Hex screw

A pair of blade holders allowing the use of

Fig. 4

plain blades (see fig 4)

Blade holder

A. Remove the standard blade as described above, Note:

Centre hole

Easy access to the lower housing is provided, when the

Fig. 6

Fig. 5

side cover is removed.

Blade

B. Loosen the two hex screws either side of the holder &

slide the blade up into the centre hole & carefully

re-tighten both hex screws. Note: DO NOT

OVERTIGHTEN, as the blade will break. (see fig 5) Repeat

for the other holder.

4mm

hex key

C. Lower one end of the blade assembly through the

access hole in the table, ensure the blade teeth are

Housing recess

pointing DOWNWARDS & FORWARDS. Slot the lower

blade holder into the lower housing, making sure the

Clamping the blade

Lower housing beneath

holders ridge engages into the housing recess. (see fig 6)

into the holder

the work table