Axminster 150/200mm Wetstone Grinder 사용자 설명서 - 페이지 5

{카테고리_이름} Axminster 150/200mm Wetstone Grinder에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster 150/200mm Wetstone Grinder 16 페이지. 150/200mm wetstone grinder

페이지 인쇄

General Instructions for 240V Machines...

Good Working Practices/Safety

The following suggestions will enable you to observe good working

practices, keep yourself and fellow workers safe and maintain your

tools and equipment in good working order.

WARNING!!

Primary Precautions

These machine are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before

using the machine inspect the cable and the plug to make sure that neither are damaged. If

any damage is visible have the machine inspected/repaired by a suitably qualified person. If

it is necessary to replace the plug, it is preferable to use an 'unbreakable' type that will

resist damage on site. Only use a 13 Amp plug, and make sure the cable clamp is

tightened securely. Fuse as required. If extension leads are to be used, carry out the same

safety checks on them, and ensure that they are correctly rated to safely supply the current

that is required for your machine.

WARNING!!

If the machine is not fitted with a NVR type ON/OFF switch, always check that the

machine is OFF before connecting it to the mains supply.

Work Place/Environment

The machine is designed for indoor operation, do not use when or where it is liable to get

wet. If the machine is to be used outside and it starts to rain, stop work and move it inside.

If the machine has got wet; dry it off as soon as possible, with a cloth or paper towel. Do

not use 230Va.c. powered machines anywhere within a site area that is flooded or puddled,

and do not trail extension cables across wet areas. Keep the machines clean; it will enable

you to more easily see any damage that may have occurred. Clean the machine with a

damp soapy cloth if needs be, do not use any solvents or cleaners, as these may cause

damage to any plastic parts or to the electrical components.

Keep the work area as uncluttered as is practical, this includes personnel as well as

material.

Under no circumstances should CHILDREN be allowed in work areas.

KEEP TOOLS AND EQUIPMENT OUT

OF THE REACH OF YOUNG CHILDREN

Mains Powered Tools

FREEPHONE

0800 371822

A X M I N S T E R

W H I T E