Axminster AHBGDL Hobby Series 사용자 설명서 - 페이지 8

{카테고리_이름} Axminster AHBGDL Hobby Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster AHBGDL Hobby Series 16 페이지. Wide stone grinder

Setting Up the Grinder

Please read the section entitled Identification and Description of Parts, in order for you

to understand the terminology that we will use, so that you may better understand the

working and capability of your grinder. Keep this manual to hand for reference for any

other personnel that may be required to use the grinder.

Having assembled all the grinder attachments loosely, now the machine has to be set up

correctly and all the attachments securely fastened.

Place the grinder on a flat level surface.

Position the tool rests leaving a gap of approximately one and a half millimetres between the

grindstone and the rest, with the rest horizontal (preferably) tighten the star nuts securely. (See

fig 4)

Remember to adjust the tool rests as the grindstones wear down.

Adjust the spark guards until they are just clear of the grindstone; fasten the fixing bolts securely.

(See fig 5)

Remember to adjust the spark guards as the grindstones wear down.

Fig 4

Star nut

Adjust the spark guards until

they are just clear of the grindstone

Position the eye shields on their pivot bolts, (if necessary, 'nip' the clamping bolt of the eye

shield clamp so that the eye shields remain in place). If there is any tendency for the grinder to

move, tip or tilt while it is being operated, it should be bolted down; either to the bench or to a

specific stand. It is a good idea to dress new grindstones before use, to remove any possible

irregularities, and ensure the stones are running concentrically.

Leave a gap of approximately

one and a half millimetres

between the grindstone

and the rest

Fig 5