Axminster MD150Q 사용자 설명서 - 페이지 9

{카테고리_이름} Axminster MD150Q에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster MD150Q 20 페이지. 150/200mm wetstone grinder
Axminster MD150Q에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Tool jig assembly

Step 3. Mount the Tool Jig assembly by sliding it onto the support bar as illustrated above.

Please read the section entitled Identification and Description of Parts, in order for

you to understand the terminology that we will use, so that you may better

understand the working and capability of your grinder. Keep this manual to hand for

reference for any other personnel that may be required to use the grinder.

Having assembled all the grinder attachments loosely, the machine now has to be set up

correctly and all the attachments securely fastened.

Place the grinder on a flat level surface.

Position the tool rest leaving a gap of approximately one and a half millimetres between the

grindstone and the rest, with the rest horizontal (preferably) tighten the star nut securely.

(See fig 4)

Remember to adjust the tool rest as the grindstone wears down.

Adjust the spark guard until it is just clear of the grindstone; fasten the fixing bolt securely.

(See fig 5)

Remember to adjust the spark guard as the grindstone wears down.

Initial Assembly...

Step 3

Setting up the Grinder...

Continues on next page....

A X M I N S T E R

W H I T E