Axminster Craft AC150WSG 원본 사용 설명서 - 페이지 6

{카테고리_이름} Axminster Craft AC150WSG에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Craft AC150WSG 13 페이지. Wide stone grinder

Illustration and Parts Description

Grinding machine

Essentially a double ended motor, with a mounting base,

the motor flanges mount the wheel guards. The motor

base contains the On/Off NVR switch.

Wheel guards

Two formed metal guards that enclose the grinding

wheels. They are each formed in three parts. The inner

part is mounted onto the motor flange, The stone cover is

'sprung' into the lip of the inner part and the outer part is

located on it. The whole assembly is bolted together. There

are various 'hard point locations' that accept the fixing

bolts that secure the attachments of the machine.

Tool rests

Formed metal plates that bolt onto a hard point on the

inside cover of the wheel guard. There is an elongated slot

in the rest which gives adjustment along the coach bolt

fixing.

Eye shield/spark guard

Wheel guard

Hold down holes

Grindstone

Eye shield/ spark guards

Clear protective shields that mount over the grindstone to

afford a view of the workpiece, but offer protection for the

eyes, They are mounted onto the spark guards making a

complete assembly that bolts through a hard point on the

upper part of the stone cover. The spark guard itself has an

elongated slot to allow positioning and adjustment as the

wheel diameter decreases. Their function is to contain,any

material (esp. sparks) that would be tracked around the

grindstone and sprayed out of the machine esp. over the

hands.

ON/OFF switch

A NVR double button switch panel, marked 'I' for On and

'O' for Off. The NVR function ensures the machine will

not be left in the 'ON' condition, in the event of a power

failure, and subsequent re-establishment of the supply.

Hold down holes

Four 8mm holes set in a matrix in the corner flanges of

the chassis to enable the grinder to be bolted down to the

bench or a stand.

Off

Work light

Grindstone

Tool rest