Axminster Craft AC200BG 원본 사용 설명서 - 페이지 5

{카테고리_이름} Axminster Craft AC200BG에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Craft AC200BG 16 페이지.

11. Hot sparks are a hazard! Never carry out grinding

operations near flammable gas or liquid.

12. Always make sure the spark guards and eye shields

are in place, that they are properly adjusted and secured.

13. Keep the spark guards close to the wheels and

re-adjust them as the wheels wear.

14. Ensure the soft washer and the flanges furnished with

the grinder are used to mount any attachments (grinding

wheels, wire brushes, buffing wheels, etc) onto the shaft.

15. Always stand to one side of the grinder when starting

the machine.

Step 1

Step 2

Specific Safety Precautions for Grinding Machines

16. Avoid awkward hand positions where a sudden slip

could cause the hands to come into contact with a grinding

wheel, wire brush etc.

17. If the wheel requires dressing, dress only the front of

the wheel, do not dress the sides.

18. Do not use any attachments that causes the machine

to vibrate. If, after changing grinding wheels or adding

attachments, the machine does vibrate, remove the

recently replaced item and change again.

19. Grinding creates heat. Do not touch the work face

of the work piece until you are sure it has cooled down

sufficiently.

AC200BG

Locate the tool rests (D) and secure them to the stone guard

housings using the bolts/washers (C) for the AC150BG and the

two butterfly knobs/washers (E) for the AC200BG.

Assembly

Continues Over...