Axminster Trade 105781 원본 사용 설명서 - 페이지 8

{카테고리_이름} Axminster Trade 105781에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster Trade 105781 16 페이지. Cyclone extractors
Axminster Trade 105781에 대해서도 마찬가지입니다: 원본 사용 설명서 (16 페이지)

페이지 인쇄

OPERATING AND ADJUSTMENTS

Switching ON/Off

ALWAYS TURN ON/OFF THE EXTRACTOR BY THE

NVR CONTROL SWITCH NOT THE MAINS SWITCH

This is to allow the shaker motor on the (AP357CEH)

to perform the self cleaning operation. If the cyclone

extractor is turned off at the mains switch, the shaker

motor will not cut in. If this is constantly repeated,

eventually the filter will become blocked, causing

reduced performance.

Manometer

The manometer is used to monitor the air flow in the

ducting system. When you first use your extractor it is

recommended you mark on 'manometer' the pressure

the extractor it running at, to do this follow the

instructions below.

Note: the reading can vary depending on the size of

the ducting system.

1. Connect your cyclone extractor to the ducting system.

2. Start up the extractor by pressing the 'green' button on

the NVR switch assembly and check the reading on the

manometer.

3. Using a marker or sticky label mark the reading on the

manometer, (see figure 01). This is to confirm that every

time you switch on you know what the read will be.

Figure 01

If you find the reading has increased there could be a

blockage in the ducting system or extractor unit, check

the following:

WARNING!! BEFORE CARRYING OUT ANY

MAINTENANCE DISCONNECT THE CYCLONE

EXTRACTOR FROM THE MAINS SUPPLY

• Check the rear filter for signs of build of sawdust and

clean with a vacuum cleaner

• Check the shaker motor is working properly

• Check the hoses for blockages

• Check the bin bag and empty if full

If the reading has decreased, check the following:

• Check the hoses are secure, 'NOT LOOSE' which will

lead to air leakages

• Check hoses for splits and cracks

• Check "Blastgates" that are not in use are shut

Extraction Accessories

For all of our accessories please see our catalogue and

website or contact us on:

Freephone: 03332 406 406

Replacement Waste Sacks

Code: 106369 Bin Sacks for AT154CEH & AP176CEH

Code: 106370 Bin Sacks for AT357CEH

Code: 106368 Filter Sacks for AT154CEH, AT176CEH, AT357CEH