ALPHAFIT HEAVY BAG BOXING TOWER 조립 설명서 - 페이지 2
{카테고리_이름} ALPHAFIT HEAVY BAG BOXING TOWER에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALPHAFIT HEAVY BAG BOXING TOWER 4 페이지.
페이지 인쇄COMPONENT OVERVIEW
HEAVY BAG BOXING TOWER PART LIST:
INCLUDED FASTENERS:
A
4×
M12 × 35mm Hex
Zinc Plated Bolt
Read this entire guide before attempting to build or use this machine. This guide contains step by step instructions for proper
assembly. AlphaFit recommends a minimum of two (2) people to assemble the Heavy Bag Boxing Tower.
Use the parts list included in this guide to verify that all parts are accounted for before assembly. If any parts are missing, contact
AlphaFit on 1300 257 428 or [email protected].
1×
B
8×
4×
M12
Flat Washer
Nyloc Nut
REQUIRED TOOLS:
• 19mm Socket &
C
Socket Spanner
M12
1×
1×
1×
1×
RECOMMENDED TOOLS:
• 19mm Offset Wrench
• Ladder
• Anchors
• Concrete Drill
• Impact Driver