AlphaLab Precis-Ion AIC3Pro 운영자 매뉴얼 - 페이지 4

{카테고리_이름} AlphaLab Precis-Ion AIC3Pro에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlphaLab Precis-Ion AIC3Pro 16 페이지. Air ion counter
AlphaLab Precis-Ion AIC3Pro에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

Grounding the AIC3Pro

Air Ions are charged air molecules. These air molecules are measured with respect to earth/ground

reference. Thus, the meter must have an earth ground reference either via the hand/body of the

operator or a ground cable connected to an outlet ground or other ground connection.

At low air ion counts (<20K ions/cc), holding the meter (with the kickstand removed) maintains suffi-

cient ground reference, provided that your body doesn't build up a static charge. Occasionally touching

a pipe or the screw on a light switch plate will ensure accurate readings.

When using the kickstand (no meter to hand contact) or any time when high ion counts are possible,

such as the ion counts near ionizers, the ground cable must be used!

Common Symptom if the Meter Is Not Grounded:

If not grounded when exposed to high ion levels, the

meter will initially show a high ion count. Then as the

meter's housing builds up a static charge from the

charged air molecules, air ions in the vicinity of the

meter will be repelled, and the air ion count will rapidly

decrease to near zero. Materials between the ion

counter and ion source can also become charged and

repel air ions. See the bottom of page 15.

Bi-Polar Ionizers:

Well balanced bi-polar ionizers minimize the static

charge compared to single polarity ionizers. However,

any static electricity (even that which is created from

walking on a carpet) will influence air ion readings.

Grounding insures accurate readings.

A 10 ft. (3 meter) ground cable is included with connectors

for grounding (earthing) the AIC3Pro to a standard wall outlet

(mains), ESD mats, metal water pipes, or metal heating/air

conditioning ducts.

Using USB Connection as Earth Ground:

The included USB charger will not provide earth

grounding. PCs and laptops with the third prong

ground connection power cords usually provide

earth ground via their USB ports. Unless you know

for sure that your PC's USB ports are grounded, do

not rely on grounding via a USB cable.

USB Connecting Caution

When measuring high ion counts near an ion

generator, make sure the meter is grounded prior

to connecting the USB cable to a desktop or laptop

PC. Failing to do so may damage the AIC3Pro

and/or the computer!

Grounding cable connection

at the bottom of the meter.