Alphalite Alpha FPL-24H 설치 지침 - 페이지 4

{카테고리_이름} Alphalite Alpha FPL-24H에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphalite Alpha FPL-24H 4 페이지. Led flat panel

페이지 인쇄
Panel size
2'x2'
3. Attach the four brackets to the two sides of panel and secured. And attach suspension wire and hook the triangle on four plates.
1'x4'/ 2'x4'
4. Adjust length of suspension wire by pressing nipple on top. Ensure both wires are same length.
5. Connect power.
Note: The drivers and connector must be fixed to the back of the panel by adhesive tape.
Wiring Installation Steps:
Wiring Diagram:
Fig. 1
Black(Line)
White(Neutral)
120-277v
Green(Grd)
Dimming wire
to 0-10v IEC
compliant control
10715 Springdale Ave, Unit 4, Santa Fe Springs, CA 90670
Position for making holes
A(inch)
B(inch)
22.5"
17"
17"
screw
0-10V Dimmable Wiring
Follow the wiring directions as in fig. 1.
1. Connect the black fixture lead to the (+)
LINE supply lead.
2. Connect the white fixture lead to the (-)
COMMON supply lead.
3. Connect the GROUND wire from fixture
to supply ground. Do NOT connect the
Lead wire to
GROUND of the dimming fixture to the
LED load
output.
4. Connect the purple fixture lead to the
(V+) DIM lead.
5. Connect the gray fixture lead to the (V-)
DIM lead.
l
43"
Tel: 1-888-287-9228
Fax: 1-888-258-9183
l
WARNING
RISK OF PERSONAL INJURY
Proper grounding of metal
parts is required for safety.
ON-OFF Wiring
Follow the wiring directions as in fig. 1.
1. Connect the black fixture lead to the
LINE supply lead.
2. Connect the white fixture lead to the
COMMON/NEUTRAL supply lead.
3. Connect the GROUND wire from fixture
to supply ground.
l