Axon Body 3 기능 설명서
{카테고리_이름} Axon Body 3에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axon Body 3 2 페이지. Camera battery replacement
Axon Body 3에 대해서도 마찬가지입니다: 일반 지침 (2 페이지), 교체 매뉴얼 (7 페이지)
페이지 인쇄
Axon Body 3 Function Guide
IMPORTANT: Before using an Axon Body 3 camera, ensure it is registered to your agency, assigned, and
fully charged. Refer to the Axon Body 3 Registration Guide or
Power Button
Volume Button
Select Button
Volume Button
Triad LED
Program Button
Microphone
Front View
Read, understand, and follow all current instructions, warnings, and relevant Axon training materials before using any Axon system. The
most up-to-date warnings and instructions are available at www.axon.com. See the Axon Help Center (www.axon.com/body3help) for
registration information, operating instruction, training videos, and manuals for the Axon Body 3 camera.
Operating Button Actions
The Axon Body 3 camera button actions associated with each user
action are described below.
Action
Power On
Power Off
Start recording
End recording
Add marker to recording
Increase speaker volume
Decrease speaker volume
Turn lights on or off
Enter Stealth mode
Exit Stealth mode
Enter or exit Mute mode
Enter Sleep mode
Exit Sleep mode
Activate display backlight
Pairing
* - The camera remembers volume and light settings when exiting Stealth mode.
Camera Display
The Axon Body 3 camera display, on top of the camera, shows camera status and activity information. The display is divided into a Status Bar and
Activity Area. Different information is shown in the field and dock. See the other side of this guide for additional camera display information.
Note: Some icons may not be active or displayed at your agency.
Speaker
Lens
Microphone
EVENT Button
Start recording = Double press
Stop recording = Hold 3 Sec
Button Actions
Press Power button until short vibration.
Camera starts and enters Ready
(Buffering) mode.
Press and hold Power button for 3
seconds.
Double-press Event button.
Press and hold Event button for 3
seconds.
While recording, press Select button.
Press Volume button.
Press Volume button.
Press and hold Volume button for 3
seconds.
Press and hold Volume button for 3
seconds.
Press and hold Volume or Volume
button for 3 seconds*.
While recording, press and hold Select
button for 3 seconds.
Press Power button and then press
Select button
Press Power button or double-press
Event Button
Double-press Select button. Display
backlight turns on for 5 seconds.
Simultaneously press Event and
Program buttons, then release.
Status Bar
Activity Area
online instructions
Camera Reference
Display
Operation LED
Top View
Uploading Videos and Charging Axon Body 3
Cameras
Insert the Axon Body 3 camera into an Axon Body 3 Dock bay to
upload videos and charge the camera's battery.
DO NOT unplug the Axon Dock power supply while Axon devices are
inserted in the bays.
Examples: Axon Body 3 camera inserted into a 1-Bay dock (left) and an 8-Bay dock (right)
Using Axon View
The Axon View application enables you to replay video and add metadata
(GPS, title, case ID, and category) to your videos using a smart phone or
other smart device. Note: Videos are not stored on your smart device
1. Using your smart device, search for, download, and install the Axon
View application from the Play Store or the App Store.
2. Open Axon View, select a Axon Body 3 camera and tap Initiate
Pairing. You may need to sign in to your Axon Evidence.com account.
3. Turn on your Axon Body 3 camera. On the Axon Body 3 camera,
press the Program and Event buttons at the same time.
You will hear three short rising-pitch tones, the Operation LED will
blink blue, and PAIRING is shown on the display.
4. Follow the Axon View on-screen instructions.
Status Bar Icons
for more information.
Microphone
Power Button
USB C Connector
Bottom View
Description
Battery capacity
Camera paired
Lights off
Stealth mode on
Battery low warning (right of battery capacity)
Microphone