Axon Body 4 빠른 시작 매뉴얼

{카테고리_이름} Axon Body 4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axon Body 4 2 페이지. And flex pov module

페이지 인쇄

AXON BODY 4 AND FLEX POV MODULE QUICK START GUIDE

For more information, including detailed operating instructions and video walkthroughs,

scan the QR Code or go to

FRONT

Programmable

Buttons 1, 2

Event Button

Volume Up

Select

Volume Down

Power Button

REGISTRATION

To register your Axon Body 4 Camera:

1. Enable "Automatic Camera Registration" in the Axon Body 4 Settings page in

Axon Evidence.

2. Register the dock using the Axon Device Manager (ADM) app.

3. Connect the dock to power and internet.

4. Place unregistered Axon Body 4 Camera in the registered dock. Unregistered

cameras will automatically register themselves to the same agency as the dock.

For additional help registering cameras to your agency, refer to

the Axon Body 4 Registration Guide, scan the QR code, or go to

https:/ /my.axon.com/s/article/Register-My-Axon-Body-4.

Action

Power on

Press POWER until short vibration

Power off

Press POWER for 3 seconds

Start recording

Double-press EVENT

End recording

Press EVENT for 3 seconds

Watch Me

Double-press PROGRAMMABLE BUTTON 1

Add marker

Press SELECT while recording

Speaker volume

Press VOLUME

Toggle light setting

toggle modes

Enter Stealth mode

Press VOLUME

Exit Stealth Mode

Press VOLUME

Mute audio

Press SELECT for 3 seconds while recording

Press SELECT for 3 seconds or double-press

EVENT

Exit audio mute

Enter Sleep mode

Press POWER then SELECT to confirm

Exit Sleep mode

Press POWER

Pairing

Press EVENT and SELECT simultaneously

Enter menu

Double-press SELECT

https:/

/my.axon.com/s/axon-body-4.

Microphones

Camera Lens

POV Connector

Port

Speaker (R)

Triad LEDs

USB-C Port

Microphones

Power Button

Button Press

or VOLUME

for 3 seconds, then again to

for 3 seconds

or VOLUME

for 3 seconds

TOP

Display

Speaker (L)

Operation

LED

BOTTOM

Magnetic

Charger Port

FLEX POV MODULE

The Flex POV module does not require charging or offload. When a Flex POV module

is connected, Axon Body 4 will buffer and record from the POV module perspective.

When the POV module is disconnected, it will switch back to the body-worn camera

perspective automatically.

MAGNETIC DISCONNECT CHARGING CABLE

The magnetic disconnect charging cable allows in-vehicle charging yet will break

away should a camera-wearer need to exit the vehicle rapidly.

1. Connect USB-C to an outlet in the vehicle or a 12V charging adapter.

2. Line up the Axon logo on the cable with the Axon logo on the camera. The cable

will magnetically align itself.

Important: Ensure the USB-C port on the bottom of the camera is dry and free of dirt

and debris before placing the camera in the dock or connecting a USB-C cable. A water

droplet

on the camera screen indicates the port is not dry.

BACK

Drainage

Holes

Vent

Microphone

Rapid Lock

Mount

Serial

Number

Microphone

Mount

Magnets