Alphamount APMTK1 사용 설명서 - 페이지 10

{카테고리_이름} Alphamount APMTK1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphamount APMTK1 12 페이지.

2B-3

Use the hammer to knock

anchors [A3] into the wall.

Be sure the anchors [A3]

are seated ﬂush with the

concrete surface.

Step 3 Fix Tilting Angle

Loosen the 4 pcs tilt preassembled bolts [T] in both brackets [02] and [03].

Adjust the hooks [H] to your desired angle. Then tighten the 4 pcs tilt preas-

sembled bolts [T] with a screwdriver (not included) to ﬁx the tilting angle.

Note: Do not over-tighten the bolts.

Install wall plate using lag

screws [A1] and washers [A2].

Tighten the lag screws [A1]

only until the washers [A2] are

pulled ﬁrmly against the wall

plate. DO NOT over-tighten

the lag screws [A1].

3/8 in. (10mm)

Socket Wrench