AxonKids Babyfix base 사용 설명서 - 페이지 5

{카테고리_이름} AxonKids Babyfix base에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AxonKids Babyfix base 8 페이지. For babies weighing up to 13kg

Attaching base to the car seat

You could use either the belts of the

car or the ISOFIX holding system to

fixate the base to the car seat, depen-

dent of your car specifications. If you

are uncertain of which system to use

check your car manual for information.

1. Pull the car seatbelt under the

hooks as shown in picture 1. Lock the

belt, picture 2. Then press the base unit

into the seat and pull the car seatbelt

as far as it will go then attach the belt

lock-off. The belt lock shall always be

on the same side as the car buckle.

2. Extend the leg by pushing the

release button and adjust the length

so that it is fully supported by the car

floor, pic 3. Ensure that the leg is stand-

ing firmly against the floor and that the

base is not able to slip.

3. The base should look like in pic-

ture 4 when it is assembled correct.