Alphasmart 3000 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Alphasmart 3000에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphasmart 3000 13 페이지.
Alphasmart 3000에 대해서도 마찬가지입니다: 조립 지침 (4 페이지), 빠른 매뉴얼 (3 페이지)

페이지 인쇄

PC Y Cable

Turn off your computer.

Disconnect the keyboard from the computer keyboard

port and determine if it is a 5-pin (larger) or Mini-DIN 6-

pin (smaller and more common) connector.

If the keyboard has a Mini-DIN 6-pin connector:

Connect the orange end of the PC Y cable,

labeled "Connect to PC computer port" into the

keyboard port on the back of your computer.

Next, connect the computer keyboard cable into

the orange end of the 8-inch adapter cable.

Then connect the purple end of the adapter

cable to the purple end of the PC Y cable (see

below).

AlphaSmart 3000

If the keyboard has a 5-pin connector:

Connect the orange end of the adapter cable to

the orange end of the PC Y cable. Next,

connect the purple end of the PC adapter cable

into the keyboard port on the back of your

computer. Then connect the computer keyboard

cable into the purple end of the PC Y cable,

labeled "Connect to PC keyboard cable" (see

below).

Plug the grey end into the computer port on the right

side of your AlphaSmart.

With the PC Y cable installed, turn on the computer,

wait for complete boot up, and test your regular

keyboard for operation. The AlphaSmart and your PC

keyboard should both be able to type into a text entry

document (i.e. MS Word, Excel, Powerpoint, etc.).

Please note: The blue end of the PC Y cable is used to

connect older models of the AlphaSmart (2000s or Pros).

Warning: Always leave the PC Y cable installed. If for any

reason you need to remove the PC Y cable from the computer,

do so when your computer is turned off.