Alphasmart Manager for Dana 설치 매뉴얼 - 페이지 2

{카테고리_이름} Alphasmart Manager for Dana에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphasmart Manager for Dana 10 페이지. Installing applications
Alphasmart Manager for Dana에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

General Installation Instructions

The general method for installing an application is usually the same for all applications,

but there are some variations. The following steps can be used as a starting place for any

application.

To install an application using AlphaSmart Manager for Dana:

1. In Palm Desktop, create a user name using the application's name. If the name is

more than six characters, use an abbreviation because Palm Desktop cryptically

shortens names greater than six characters.

a. In Palm Desktop, choose Tools > Users.

b. Click New and enter a user name. Click OK.

c. Click OK.

2. Install the application per the manufacturer's instructions to the newly created user

name, but do not HotSync.

3. Use AlphaSmart Manager for Dana to transfer the installed files to Dana. The

Import Palm User or Profile method, described below, is usually the best choice

for installing complete applications. The Use the Add Other Files Tab method is

better if you need to send only a few of the available files to Dana.

The Import Palm User or Profile Method

a. In AlphaSmart Manager for Dana, choose File > Import Palm User or

Profile. The Import Palm User or Profile dialog box appears.

b. Select the user name you created in step 1 and click OK. AlphaSmart

Manager for Dana imports the installation files.

c. Click the Send List tab to verify that the files appear in the send list.

d. If you want to send the application to a few devices but not all, click

Select Devices, select the Danas to which you want to send it, then click

OK. (If you want to send the application to all connected devices, skip

this step.)

e. Click Send.

Or,

Use the Add Other Files Tab:

a. In AlphaSmart Manager for Dana, click the Add Other Files/Apps tab.

b. Click Add to List.

c. Browse to Program Files\Palm\UserNameCreatedInStep1\Install. (The

installed files can usually be found here, but be aware that some

applications may install the program files to a different folder.)

d. Select the files to send and click Add. (Pressing Ctrl+A selects all files.)

e. Click the Send List tab.

f. If you want to send the application to a few devices but not all, click

Select Devices, select the Danas to which you want to send it, then click

OK. (If you want to send the application to all connected devices, skip

this step.)

g. Click Send.