AccuPel HDG-4 사용자 설명서 - 페이지 9

{카테고리_이름} AccuPel HDG-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuPel HDG-4 11 페이지.

HDG-4000 ANALOG/DIGITAL VIDEO CALIBRATION GENERATOR

On Screen Display (OSD) Systems

Info – Each time a pattern is changed the name of the pattern, which includes important signal

identification information, is displayed on-screen for approximately one second. Press the Info button to

display the pattern information continuously. Press the Info button again to resume the default display

period.

The OSD Menu is produced by all analog and digital outputs, for all signal formats. The OSD Menu

provides additional features such as user definable grayscale values and colors, access to advanced

signal parameters, communications port control, and the ability to specify generator power-up default

modes.

Press the Menu button to display the OSD window, which is organized into three columns. The left

column of the OSD window currently lists six menus – User Level, Output, Sync, Misc, Com Ports, and

Defaults. Use the cursor keys to highlight the desired menu, and then move into the middle column and

highlight a menu item. The current status of each highlighted item is shown in the right column. To

change a setting move into the right column and highlight one of the alternative settings that will be

listed in that column. In most cases it is not necessary to press the Enter key unless "Enter" appears in

the right column. In that case highlight "Enter" and press the remote control Enter key to proceed.

Press Menu to turn the OSD menu on or off. The cursor position in the OSD menu is maintained when

the menu is turned on or off, so it is easy to turn the menu off when making measurements or adjusting

a calibration setting, and then turn it back on again to change the same menu item.

HDG-4 USER MANUAL