Cinelex DESK-TX8 운영 매뉴얼 - 페이지 3

{카테고리_이름} Cinelex DESK-TX8에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cinelex DESK-TX8 6 페이지. Wireless dmx transmitter

Power Off

To power off the DESK-TX8 press and hold POWER (red) button until OFF appears in the display.

Then confirm by pressing the OFF (Blue) button. The DESK-TX8 is now powered down. Remove the

batteries if the DESK will not be used again for a long time.

Operation

With the batteries inserted, or AC Adaptor connected, press the POWER (red) button.

The led under the power button will light red. The display will show the last selected DMX channel,

or PAGE number, and the led under the white SYNC button will light green.

As default setting the DESK-TX8 is shipped from the factory in Standard quick 8-Channel mode. To

switch between Standard and PAGE modes see page 4.

In Standard Mode

•

Power up DESK-TX8 using 4 x AA batteries or supplied AC Adaptor

•

Switch on DESK-TX8 by pressing the red power button

•

Select the DMX channel you wish to assign to fader No1 (001 – 512) by holding down the

green ADDL (Address Lock ) button, see fig 4, and using the blue UP / DOWN keys to scroll

up and down. When desired channel is reached release the ADDL key to lock in address.

•

The next 8 channels will automatically be sequentially assigned to the other faders No2~7.

So if, for example, 1

automatically DMX addresses 006~012.

3 |

P a g e

fader is assigned to DMX address 005 then next faders are

fig 3.

fig 4.