Cinematography Electronics AIR Mobile2 운영 지침 - 페이지 2

{카테고리_이름} Cinematography Electronics AIR Mobile2에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cinematography Electronics AIR Mobile2 2 페이지.

OPERATING INSTRUCTIONS

AIR Mobile2

CONNECT LED INDICATOR

The green Connect LED indicator (engraved CONNECT) is the upper left LED on the front face. This

indicator glows green when the AIR Mobile 2 is on the same channel and communicating with a CineTape2.

BT-APP LED INDICATOR

The dual function, multicolor, BT-APP LED indicator (engraved BT-APP) is the middle left LED on the front

face. This indicator glows blue when the AIR Mobile 2 is linked, via Bluetooth, to an iPhone with the

CineTape AIR App. This LED is also the low battery indicator and glows red when the removable battery

voltage drops below a preset level. When red, change the battery within the next few hours.

Don't panic, the AIR Mobile2 doesn't draw much current. The LED will glow violet (purple) with both a

Bluetooth connection and a low battery condition.

SENSE LED INDICATOR

The green Sense LED indicator (engraved SENSE) the lower left LED on the front face. It mimics the green

Sense LED of the CineTape2. See the "Adjusting the Sensitivity" section in the CineTape2 Operating

Instructions for more information.

BATTERY INSTALLATION

The AIR Mobile2 is powered by a small removable and rechargeable battery.

To install the battery, slide-open the battery door located on the right side of the AIR Mobile2. Slide

the contact end of the battery, with the arrow face up, pointed left, into the battery compartment. Close the

sliding door. Note, the door will not close if the battery is improperly inserted. A new fully charged battery

lasts about 20 hours (note that the red low battery LED glows after 14 hours). Recharge the battery when

depleted.

We recommend using genuine Sony 3.6 NP-BX1 batteries.

CONNECTING to an iPhone with the CineTape AIR App

The AIR Mobile2 has a built-in Bluetooth feature for connecting to an iPhone. The CineTape AIR App

provides additional features and connects devices within a range of 25 feet (8 meters). Download the

CineTape AIR app, to an iPhone, from the Apple App Store. When using the CineTape AIR App, the

iPhone's Bluetooth connection should be turned on.

Open the app on the iPhone by tapping the CineTape AIR icon. Touch the "Tap To Connect" area near the

top of the app and a list of nearby Air Mobile2 and CineTape2 units appears. Each listed item has a unique

3 digit code. Select the connect code and the AIRmobile2 instantly links to your iPhone.

CONNECTING to a CineTape2

The AIR Mobile2 connects to the CineTape2 on a 2.4GHz wireless frequency band. The AIR Mobile2

features a robust range of 500 feet (150 meters) with 40 wireless channels. Use red push-button

Power/Channel switch and the red push-button up/down switches to select a channel that matches the

CineTape2 channel. The green Connect LED glows when the units are communicating.

Page 2 of 2