Alphasonik HYPER HSW210 매뉴얼 - 페이지 13

{카테고리_이름} Alphasonik HYPER HSW210에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphasonik HYPER HSW210 16 페이지.

Investigate the layout of your vehicle thoroughly before drilling

or cutting. Take care when you work near the gas tank, gas lines,

hydraulic lines, electrical components and electrical wiring.

use the equipment unmounted. Attach this system securely to prevent

damage, particularly in the event of an accident or aggressive driving.

Do not mount the system so that wire connections are unprotected or

are subjected to pinching or damage from nearby objects. Before

connecting or disconnecting power connections at the system power

terminals, disconnect the +12V DC wire at the battery end. Confirm

that your source unit and other equipment are turned off while

connecting the input terminals. If you need to replace the power fuse,

replace it only with a fuse identical to the provided fuse. Using a fuse

of different type or rating may result in damage to the system, which is

not covered by the manufacturer's warranty. Do not install any

product where it may be subjected to excessive heat, moisture and

dust or where it may be repeatedly kicked, brushed or bumped. Make

absolutely sure that the terminals for the products are connected to the

proper inputs and outputs from the music source. Never run the

wiring on the outside of the vehicle or under it where it can be damaged

by road hazards or any moving parts of the vehicle. Use existing wire

channels, sills, panels and molding strips inside the vehicle to hide the

wiring for safety and a neat appearance.

IMPORTANT: Never cut any metal that is an integral part of

the vehicle's safety or structural support system. If you are unsure, it

is best to have the product professionally installed by an Authorized

Alphasonik Dealer. Never sacrifice your safety for sound.

DISCLAIMER

Do not