Alphasonik V80BN 매뉴얼 - 페이지 3
{카테고리_이름} Alphasonik V80BN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphasonik V80BN 9 페이지.
페이지 인쇄PRODUCT DETAILS
ATTENTION
The control buttons are located on the outer-side of the
earpad cushion.
1.
ANC LED Indicator
2.
ANC Button
3.
Headset
/ -
4.
- Button
5.
On/Off / Multi Function Button
4
/+
6.
- Button
7.
Status LED Indicator
8.
Micro-USB Connector
9.
Microphone
10. 3.5mm WIRED Input
PRODUCT DETAILS CONTINUED
HEADPHONE REQUIREMENTS
– Bluetooth source device must be Bluetooth 4.0 or higher.
– Micro USB Charging requirements: 5V / 500mA.
ATTENTION
Fully charge the headset before using for the first time.
– The headset can be used while charging. The
LED will continue to flash red during charge.
CHARGING
1.
Connect the micro USB cable to your headset and a
compatible USB power source.
2.
During the charging process, the status LED will
illuminate red.
3.
When the headset is fully charged, the status LED will
illuminate green. Disconnect your headset from the
power source.
LOW BATTERY
When the headsets battery becomes low, an audible
warning will be announced to charge the unit soon.
5