Axor Montreux 16805XX1 설치 지침 / 보증 - 페이지 8

{카테고리_이름} Axor Montreux 16805XX1에 대한 설치 지침 / 보증을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Montreux 16805XX1 12 페이지. Axor - hansgrohe, inc. faucet installation instructions / warranty

페이지 인쇄

Install the pop-up drain (16510 / 16511 only)

Remove the plunger assembly.

Unscrew the drain outlet flange from the tee.

Unscrew the tailpiece from the tee. Wrap the

threads with Teflon tape and replace.

Install the white, flexible sealing gasket to the

flange. Place it in the sink outlet.

Install the black mack gasket, white friction ring

and retainer nut on the flange.

Do not tighten the nut against the bottom of the

sink at this time.

Thread the tee and tailpiece to the flange. The

pivot must face the faucet. Turn the drain assem-

bly if necessary.

Tighten the retainer nut.

Place the plunger assembly in the drain.

Install the horizontal rod so that the end goes

through the loop in the bottom of the plunger.

Install and hand tighten the pivot ball nut.

Attach the swivel connector to the end of the

horizontal rod.

Attach the swivel connector to the end of the

pull rod. Position as desired and tighten with a

small, flat bladed screwdriver.