ARC MYCR-100 매뉴얼 - 페이지 8

{카테고리_이름} ARC MYCR-100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC MYCR-100 9 페이지. Wireless mini dimmer socket switch plug

Issue Date: 27/07/20

3. Minimum Brightness Level Setup

Socket switch has the ability to setup minimum brightness level.

There are total 4 level brightness to choose from.

To adjust the brightness level, please follow below setup.

With a remote control (LYCT-505)

1. Enter into Learning mode (socket switch into an electrical outlet)

2. With the remote-control press and hold down 'ON' button for 3 seconds.

3. Load will flash twice to confirm it is now ready to setup minimum brightness.

4. Use the remote control and press 'ON' to dim up on level or press 'OFF'

button to dim down one level. There are only 4 levels to adjust.

5. Once you have decided the brightness level, hold down 'ON' button for 3

seconds.

6. Load will flash twice and resume to the lowest dim level. This completes the

brightness level setup.

With a one button remote control (MKFT-1704 / MEBT-1706)

1. Enter into Learning mode (socket switch into an electrical outlet)

2. With the remote-control press and hold down 'ON/OFF' button for 3 seconds.

3. Load will flash twice to confirm it is now ready to setup minimum brightness.

4. Use the remote control and press 'ON/OFF' button once to dim up on level or

press 'ON/OFF' button twice to dim down one level. There are only 4 levels

to adjust.

5. Once you have decided the brightness level, hold down 'ON/OFF' button for

3 seconds.

6. Load will flash twice and resume to the lowest dim level. This completes the

brightness level setup.

MINIMUM BRIGHTNESS LEVEL SETUP