ARC MYCR-250 매뉴얼 - 페이지 9

{카테고리_이름} ARC MYCR-250에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC MYCR-250 12 페이지. Wireless mini dimmer socket switch plug

Issue Date: 05/02/2020

5. Minimum Brightness Level Setup

Socket switch has the ability to setup minimum brightness level for both Leading

or Trailing Edge.

There are total 4 level brightness to choose from.

To adjust the brightness level, please follow below setup.

With a remote control (LYCT-505)

1. Load must be at 'ON' status.

2. Press and hold down Manual 'ON/OFF' button on socket switch for 3

seconds.

3. LED on socket switch will flash twice each interval.

4. Use a remote control and press 'ON' to dim up on level or press 'OFF' button

to dim down one level. There are only 4 levels to adjust.

5. Once you have decided the brightness level, press the Manual 'ON/OFF'

button on socket switch once.

6. LED on socket switch will quick flash and load will flash twice and resume to

the lowest dim level. This completes the brightness level setup.

With a one button remote control (MKFT-1704 / MEBT-1706)

1. Load must be at 'ON' status.

2. Press and hold down Manual 'ON/OFF' button on socket switch for 3

seconds.

3. LED on socket switch will flash twice each interval.

4. Use a remote control and press 'ON/OFF once' to dim up on level or press

'ON/OFF' button twice to dim down one level. There are only 4 levels to

adjust.

5. Once you have decided the brightness level, press the Manual 'ON/OFF'

button on socket switch once.

6. LED on socket switch will quick flash and load will flash twice and resume to

the lowest dim level. This completes the brightness level setup.

MINIMUM BRIGHTNESS LEVEL SETUP