ARC R11-W 매뉴얼 - 페이지 2
{카테고리_이름} ARC R11-W에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC R11-W 9 페이지.
페이지 인쇄R112031
R11 Shock Cap-Black (2)
Silicone Oil #500
(4pcs)
(2pcs)
Fill the shock oil to the top of the
shock body
(2pcs)
(4pcs)
R101130
Shock Ball Joint Set Big Bore
R104016
Shock Membrance Big Bore (4)
PUSH
To adjust the rebound amount of the shock,
push the shock shaft in to the required level
to remove excess oil during assembly
R103027
5.8mm Ball End Short (4)
R107042
Front Shock Spring short (Yellow)(2)
R107031
Rear Shock Spring Long (Green)(2)
BAG 02
Move the shaft up and down to
let the air escape from the oil
2
25%
1
50%
75%
BAG 02
Drill the shock cap here to help provide zero
rebound and softer dampening (optional setting)
Front (Short)
Rear (Long)
Set to 57.5mm
Set to 59mm
Short
Long
Build shocks to the
following lengths
03
R112060
R11W Main Chassis-Alu
R112001
R11 Bulkhead
R105203
3x6mm Flat Screw (10)
0
0
0
R119002
R11 Separated Suspension Block #0
R105203
3x6mm Flat Screw (10)
R119001
R11 Separated Suspension Block #2
Flat side out
#2
#2
Flat side in
#-1
#-1
Option Parts
BAG 02
BAG 02
0
0
R119002
R11 Separated Suspension Block #0
Cut side in
#0
#0
#1
#1
Cut side out
Default use in Front & REAR
04
0