ARC Audio FD2200 소유자 매뉴얼 - 페이지 10

{카테고리_이름} ARC Audio FD2200에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC Audio FD2200 10 페이지. Arc audio owner's manual high performance audio amplifier fd2100, fd2200, fd4100, fd4150

페이지 인쇄

Troubleshooting

Problem

No Audio.

Solution

Low or no remote turn-on voltage. Check remote connections at ampli-

fier and source unit.

Blown amplifier fuse. Replace with new fast-blow fuse (same rating).

Power wires not connected. Check battery and ground wiring at ampli-

fier; also check battery connections.

Speaker leads shorted. Check speaker continuity to ground, it should not

show a common ground.

Problem

Audio cycles on and off.

Solution

Thermal protection circuits are shutting amplifier off. Check location for

adequate ventilation; consult an authorized ARC Audio Dealer.

Problem

Distorted audio.

Solution

Gain is not set properly, or damaged speaker cones. Review Setting Gain;

inspect each speaker cone for signs of damage (i.e. frozen cone, burning

smell, etc.)

Notes

It is recommended that you record your system configuration for later use. You

may find it helpful to write down your gain and crossover setting . You may

also wish to staple a copy of your sales receipt here.

Serial Number