ARC Audio MOTO 600.4 소유자 매뉴얼 - 페이지 2

{카테고리_이름} ARC Audio MOTO 600.4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARC Audio MOTO 600.4 12 페이지. 4 channel motocycle and off-road amplifier

Thank you for purchasing this ARC Audio Hi-Performance Amplifier.

This ARC Audio amplifier uses a Full Range Class D architecture that significantly improves efficiently, lowers heat

production and current draw. Don't be fooled by the small size. Class D amplifiers make more power for their size then

traditional designs making installation a breeze without compromising storage space.

Warning

We build all ARC Audio products to play at high volumes for extended periods of time. Your ears however are not

designed for high volume listening. This product can easily generate volumes that can permanently damage your

hearing. We urge you to limit your exposure to very high volume sound.

You may also find your state has laws governing the volume of an audio system. Please be aware of all local and state

laws in you area.

A properly tuned and operated audio system will deliver years of enjoyment when used properly.

Installation Instructions

ARC Audio Amplifiers are designed for easy installation in your motorcycle, car or UTV. To ensure proper operation of your

new purchase, please follow the suggestions we have listed below:

Warning

Please check the suitability of the installation location before you begin. Do not cut any of the structure. Pay close attention to

what is behind the panels. Often the manufacture will hide wires, computers or other electronic devices in the exact areas you

wish to install in.

If you do not have experience with motorcyc or automotive electrical and mechanical systems contact a professional installer.

Paying a qualified installer is almost always cheaper then paying a dealership for an avoidable repair.

Locating the Amplifier

The amplifiers must be securely mounted to a solid surface. Please select a dry location only. Do not mount the amplifier to

any area that may have excessive vibration. Position the amplifier in an area that receives sufficient airflow for proper heat

dissipation.

This amplifier is not fully waterproof. Please find a dry and protected location to mount it

Supplying Enough Power

The Laws of Nature

Your amplifier Does NOT make power. It converts power, or current, from your electrical system and turns it into a high

power musical energy. If the amp can't get all the power it needs it will not produce its full output. Your ARC Audio ampli-

fier will produce Full output for longer then other amps on the market today. If the Voltage or Current drops too low even

our amplifiers will drop below their rated output. Make sure your vehicle charging system is in good working order. Any

Hi-Performance audio amplifier will increase the demand on your alternator and battery. If you are unsure have your

charging system tested by a professional technician.

The Ground!!!

Warning: Read this Carefully

The ground wire should be connected directly to the chassis of your vehicle. Find a clear location close to the amplifier

and remove all the paint and sound deadener. Use a #10 or larger screw to secure it. A nut, bolt and lock washer would be

better still. Never use seat belt bolts for grounding.

Remember, the ground must carry the same high current as the positive power wire.

To reduce the risk of noise, run all signal cables away from any vehicle or power supply wiring.

NOTE

In many cases a motorcycle or UTV will have the battery in a location that is idea for a grounding point. At the same

time grounding to the body or frame could be problematic. Do to the relatively small size of the vehicle there is no

disadvantage to grounding at the battery .

TOP