Cino Fuzzyscan 빠른 참조 매뉴얼 - 페이지 9

{카테고리_이름} Cino Fuzzyscan에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cino Fuzzyscan 12 페이지. Bluetooth cordless scanner
Cino Fuzzyscan에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄
Cino Fuzzyscan 빠른 참조 매뉴얼
Pair Android Device via SLAVE MODE
Step
Power on the scanner within Bluetooth
1.
coverage of your Android device.
Scan the "Uninstall" command listed below.
2.
®
Enable the Bluetooth
function of your
Android device to search Bluetooth device
(here, it is CINO's scanner).
3.
For this procedure please refers to the User
Manual of your Android device.
Scan "SPP Slave Mode" command.
4.
The scanner will be discovered by and shown
as "xxxxBT-xxxx" or "PxxxxBT-xxxx" on
5.
the discovered Bluetooth device list on your
Android device.
The Android device will prompt a message
for requesting PIN code. Please enter
6.
"00000000" (default) and tap "OK".
On the paired devices column of the Android
device, "xxxxBT-xxxx" shows as "Paired".
7.
Now your FuzzyScan scanner is paired to the
Android device but not connected yet.
On your Android device, launch GetBlue.
8.
Then go to "Menu" -> "Settings".
Tap on "Datasource (Input)" option and
9.
then select "Bluetooth".
Visual Signal
status indicator
link indicator
blinks red and
green
alternatively
During the
pairing: blinks
blue 3 times per
2 Sec.
7
Acoustic Signal
Screen