Cino FuzzyScan A680BT Series 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Cino FuzzyScan A680BT Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cino FuzzyScan A680BT Series 17 페이지. Cordless scanner
페이지 인쇄
Batch Scanning (Inventory Mode)
Thanks to the specially designed Batch Scanning function, the scanner is
capable of storing up to 100,000 EAN-13 barcode data. It is an ideal
cost-saving solution for inventory applications.
Once you scan the "Enter Batch Scanning" command to activate this function,
all scanned barcode data will be stored into the memory storage, and the
status indicator of scanner will give green blink at regular interval during
batch scanning. You can scan and store the barcode data till the memory
storage is full. If the storage is full, you will hear 2 long beeps and the status
indicator will give 2 red blinks to indicate out of storage. To terminate the
batch scanning, please scan the "Exit Batch Scanning" command.
Enter Batch Scanning
Use Quantity Feature
The scanner will support quantity feature when it enters batch scanning.
When you use quantity feature, the quanity information and scanned barcode
data will be stored into the memory storage together. You can enter the
quantity information from 1 to 9999 by scanning the following quantity
commands right after you had scanned the barcode data.
Quantity 0
Quantity 1
Quantity 2
Exit Batch Scanning
Quantity 3
Quantity 4
Quantity 5
Quantity 6
10
Quantity 7
Quantity 8
Quantity 9