Cino FuzzyScan L780BT 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} Cino FuzzyScan L780BT에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cino FuzzyScan L780BT 17 페이지. Cordless scanner
Cino FuzzyScan L780BT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
- 1. Getting Familiar with Your Fuzzyscan
- 2. Preparations before Using
- 3. Install the Battery
- 4. Charge the Battery
- 5. Decide Your Radio Link Mode
- 6. Use Fuzzyscan in PAIR Mode
- 7. Use Fuzzyscan in PICO Mode
- 8. Use Fuzzyscan in HID Mode
- 9. Use Fuzzyscan in SPP Mode
- 10. Presentation Scanning
- 11. Batch Scanning (Inventory Mode)
- 12. Host Interface Quick Set
- 13. System Commands
- 14. Option Codes
- 15. Status Indicator
Out-of-range Scanning
When the radio connection is established between scanner and remote host
device, the scanner will transmit each scanned data right after scanning the
barcode. However, the scanner is preset not to scan any barcode data when
it loses the radio connection with the remote host device.
If you enable the out-of-range scanning function, the scanner is able to
continue scanning barcode data while it is out of radio coverage. All scanned
data will be temporarily stored into the memory buffer until radio link resumed.
Enable Out-of-range Scanning
Disable Out-of-range Scanning
◆
In case of the scanner is out of radio coverage, you will hear 4 beeps in
descending tone to indicate the radio connection lost. The link indicator of
scanner will give 3 blue blinks per 2 seconds. Once the scanner is back to
radio coverage, you will hear 4 beeps in ascending tone to indicate the radio
connection rebuilt and the link indicator of scanner will give 1 blue blink per
2.5 seconds. At the same time, all stored scanned data will be transmitted
automatically right after the radio link is resumed.
Presentation Scanning
The Presentation Scanning is designed for hand-free applications for user's
convenience. If the "Presentation Scanning Auto-sense" function is enabled,
the scanner is capable of automatically switching to presentation mode as
soon as you place it onto the SmartStand or cradle.
Enable Auto-sense
Disable Auto-sense
◆
Sleep Mode & Power Off
The scanner is preset to enter "Sleep Mode" if the scanner is not used after
time-out duration. When the scanner is under sleep mode, it is preset to enter
"Power Off" automatically if it's not woke up after time-out duration.
If you want your scanner to enter "Sleep Mode" or "Power Off" immediately,
please scan "Sleep Mode" or "Power Off" command. If you would like to wake
up the scanner, please press the trigger button.
Sleep Mode
Power Off
9