Cino CN-CA 사용 설명서 - 페이지 6
{카테고리_이름} Cino CN-CA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cino CN-CA 9 페이지.
Factory default setting
and
1
2
At standby, press and hold
After setting buzzle will ring once,
lungo keys and power key
Espresso key light and Lungo key
for 3 seconds.
indicators will blink at the same time
factory default setting is recovered.
Counter setting
At Power save mode, press and hold both volume key and power key for 3 seconds
to enter counter setting.
1. When the cumulative number falls within 1-1000, both volume keys blink at a cycle of 1 time ( 1 time/s ),
pausing 2 seconds. loop always.
2. When the cumulative number falls within1001-2000, both volume keys blink at a cycle of 2 times ( 1 time/s ),
pausing 2 seconds. loop always.
3. When the cumulative number falls within 2001-3000, both volume keys blink at a cycle of 3 times ( 1 time/s ),
pausing 2 seconds. loop always.
4. When the cumulative number falls within 3001-4000, both volume keys blink at a cycle of 4 times ( 1 time/s ),
pausing 2 seconds. loop always.
5. When the cumulative number falls within 4001-5000, both volume keys blink at a cycle of 5 times ( 1 time/s ),
pausing 2 seconds. loop always
6. When the cumulative number falls within 5001-6000, both volume keys blink at a cycle of 6 times ( 1 time/s ),
pausing 2 seconds. loop always
7. When the cumulative number reaches >6000, both volume keys blink alternatively at a cycle of 1 time/s,
pausing 2 seconds. loop always
9
Warning
Warning for water shortage
1
2
Water tank is out of water
Two volume key indicator
during work.
blinks at a cycle of 6 times
with 2 seconds of pausing.
buzzle will ring by 1Hz.
Warning for blockage
1
2
Brewing unit is blocked by
Two volume key indicator blinks
capsule outdated or damaged.
at a cycle of 6 times with 2 seconds
of pausing. buzzle will ring by 1Hz.
and
3
Press any volume key to recover
stanby fill up the tank, press any
volume key again to start the
machine
and
3
Open the handle and change for
a new capsule. Press any volume
key back to stand by.
10