Axor Starck 10929007 사용 지침/조립 지침 - 페이지 3

{카테고리_이름} Axor Starck 10929007에 대한 사용 지침/조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Starck 10929007 16 페이지.

Axor Starck 10929007 사용 지침/조립 지침
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The ceiling to which the overhead shower is to
mounted must have sufficient bearing capacity.
Observe all current and water lines when drilling!
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective coun-
tries must be observed.
⁄ Only suitable fastening material may be used! The en-
closed screws and plugs are only suitable for concrete.
T E C H N I C A L D A T A
Operating pressure:
Recommended operating pressure:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
A S S E M B L Y (see page 04)
max. 0,6 MPa
0,2 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
max. 70°C ⁄ 4 min
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
D I M E N S I O N S (see page 13)
F L O W D I A G R A M (see page 13)
S P A R E P A R T S (see page 14)
C L E A N I N G (see page 08)
0 3
EN