Cintroclear UF 400 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Cintroclear UF 400에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cintroclear UF 400 9 페이지.

1.The nut with bicone must be tightened on to the tap gently. As a rule, it is sufficient to tighten hard

by hand on to the tap stem to provide sealing. Should this not be sufficient, it may be tightened

gently using a tool. In all cases, stop tightening once it is sealed.

2. The total length of piping between the purifier outlet connector and the pure water outlet tap must not be greater than 4

metres, with a maximum head differential of 3 metres (these figures are based on an entering pressure of 4,0 bars)

3. The automatic outlet connector allows the purifier to be disconnected later from the pure water tap so that maintenance

operations may be carried out easily.

4. The inlet valve with automatic connectors allows the water supply to the purifier to be disconnected without shutting

down the water supply line. This function is useful to disconnect your purifier from the water supply when carrying out

maintenance operations.

5. The total length of the 3/8'' (9 mm) polyethylene inlet pipe must not exceed 6 metres.