Arc-Zone 1802010 운영 매뉴얼 - 페이지 10

{카테고리_이름} Arc-Zone 1802010에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arc-Zone 1802010 13 페이지. Benchtop welding positioner

Installation / Operation

1� Power cord :

Connect power to 100V~240VAC single phase power�

Note: Standard power plug: NEMA 5-15P� Adapters are provided for region with different

power socket�

NEMA-5-15P

2� Grounding stud :

Connect the grounding cable to system's grounding stud�

Warning: Unconnected grounding can cause system damage.

3� Tilt Release / Locking handle :

Turn clockwise to tighten/lock, turn counterclockwise to release�

Warning: Do not turn the locking handle while loads are present on the faceplate.

4� Power switch (SW1):

I = On, O = Off

5� Forward / Reverse switch (SW2):

Reverse (a) / Forward (`)

Reverse

6� Stop:

Press the Stop button to pause all motion and disable all control�

Rotate the Stop button clockwise to reset�

7� Speed Adjustment Knob (VR1) :

Rotate clockwise to increase speed, counter clockwise to decrease speed�

8� Foot switch (F�S):

Steps onto the foot switch to start the faceplate rotation� Release the foot switch to stop the

faceplate rotation�

9� Fuse holder (FS1):

Overload protection� Can be replaced by turning the knob clockwise to open the fuse cover�

European Adapter

Forward

Arc-Zone.com, Inc. • 1331 Specialty Dr • Vista, CA 92081 • Tel. 1.760.931.1500

Australian Adapter