Axor Citterio 39148XX1 설치 매뉴얼 - 페이지 4

{카테고리_이름} Axor Citterio 39148XX1에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Citterio 39148XX1 8 페이지. Faucet
Axor Citterio 39148XX1에 대해서도 마찬가지입니다: 사양 시트 (1 페이지)

페이지 인쇄

Install the outer sleeves to the hot

and cold valves. Measure each

outer sleeve to a point 3/8" from

the surface of the finished wall.

Mark the sleeve at this point. Cut

the sleeves. Install the inner

sleeve.

Measure the inner sleeve to a

point 1⁄2" from the surface of the

finished wall. Mark and cut the

inner sleeve at this point. Place

the handle over the inner sleeve.

The handle should be parallel

to the floor. If it is not, remove

the handle. Remove the handle

insert, turn it slightly and replace.

The handle should now be

parallel to the floor.

Remove the handles.