Cipa 80100 설치 지침 - 페이지 3
{카테고리_이름} Cipa 80100에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cipa 80100 3 페이지. Extendable replacement mirror
페이지 인쇄S
F
TEP
OUR
Installing Xtendable Trailer Tow Mirror
Clean any foreign material from sheet metal of door
exterior with a clean, soft cloth.
If you are installing an electric mirror, feed the wire
harness through the center hole in the door.
Slide the three studs on the mirror into the holes in
the door. While a second person holds the mirror in
place, thread a 10mm nut from the parts kit onto
each stud. Once the nuts are installed on each
stud, tighten them in an alternating pattern until
they are secure.
S
F
TEP
IVE
Reconnecting Electric Mirror
If installing an electric mirror, connect the wiring
harness to the plug in the door and slip the wiring
into the door cavity.
S
S
TEP
IX
Finishing Installation
Replace the gasket in the opening in the door and
reinstall the trim piece with the christmas tree fas-
tener.
S
S
TEP
EVEN
Repeat this installation procedure with the remain-
ing mirror on the other side of the vehicle.
This completes the installation of your Towing
Mirror.
CIPA USA SIDE MIRROR
Feed Wire Harness
through hole
View from Outside Vehicle
Wiring
Harness
Install 10mm
Nuts
View from Inside Vehicle
Align Studs with
holes in door
Reinstall Trim Piece
Reinstall
Reinstall
Trim Piece
Gasket
SIDE MIRRORS