Accurate Locators Pinpointer Pro 사용자 설명서 - 페이지 5

{카테고리_이름} Accurate Locators Pinpointer Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Locators Pinpointer Pro 12 페이지.

Green - Background

Targets (common ground)

Scans / Second

Scans per second is default set at 5, for normal walking speed of scan (how fast you travel).

The highest setting of 10 would be for running or vehicle speed scanning.

High and Low Value

The high and low value is default set at 15 and -15 and can be changed for the strength of the

target. The value settings are: Low = 10/-10, Med. = 25/-25 and High = 50/-50, the arrow

boxes next to the value squares fine tune to precise numbers. Clicking on the default value

returns the values to the default settings. For the weaker targets the high and low settings

(under options) can be decreased to detect the weaker targets (example 10/-10 or 5/-5 for

even weaker targets). The stronger targets dictate raising the values to separate the

surrounding background from the target.

The high and low data readings capture the highest or lowest signals for that scan. While

scanning a small difference in the numbers can mean a target is detected.

Current

The current reading is where the antenna is reading at the time. The current (current signal

strength) reading can assist in relocating the highest / lowest reading point (or target). The

highest and lowest numbers captured as data readings can be matched with the current

reading to relocate or confirm target. The color bar is indicating the current reading also.

Monitor Indicators

The colors indicate: Green as ground or background targets. Blue indicates weak targets

such as voids, tunnels, caves and possible non-ferrous metals. Yellow / Orange indicates

medium targets or the edge of a strong target. Red is a strong target such as ferrous metals. If

a weak target isn't indicated in red on the monitor then lowering the values will result in

showing the target colors.

STATUS BAR

Indicates the connected or not connected status of the antenna.

PC Set Up

Blue - Weak Target

(void, cave or tunnel)

Red - Strong Targets

(metal chest, metal pipes)