Accurate Technology DigiStop-10 설치 및 운영 매뉴얼 - 페이지 9
{카테고리_이름} Accurate Technology DigiStop-10에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology DigiStop-10 20 페이지. Digi-stop series
페이지 인쇄The LCD Display
The above figure illustrates all the segments available on the LCD.
(Not all segments are used on Digi-Stop Systems)
Pressing and holding the
/
and
key for 10 seconds with power off
ON
OFF
UNITS
will perform a full segment LCD test, display the current firmware version, and
RESET ALL PROGRAMMING PARAMETERS TO FACTORY DEFAULTS.
Maintenance
The fence extrusion should be cleaned of debris periodically. Do not use any
liquid lubricants on the scale, as this may impede the encoder's ability to
operate properly and attract other contaminants to the scale.
The readout should be cleaned periodically with compressed air to remove any
dust on the lens and keys. All fasteners should occasionally be checked for
tightness.
Accurate Technology Digi-Stop
Page 9 of 20