CipherLab 8300 사용자 설명서 - 페이지 10

{카테고리_이름} CipherLab 8300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CipherLab 8300 14 페이지. Modem cradle
CipherLab 8300에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 빠른 설치 (2 페이지)

페이지 인쇄

Code 128

UPCE

UPCE with ADDON 2

UPCE with ADDON 5

EAN8

EAN8 with ADDON 2

EAN8 with ADDON 5

EAN13

EAN13 with ADDON 2

EAN13 with ADDON 5

Other barcodes must be enabled through programming.

2. Buzzer

To test the buzzer with different Frequency/Duration. Press ENTER key to start and then

press any key to stop the test.

3. LCD & LED

To test LCD display and LED indicator. Press ENTER key to start and then press any key

to stop the test.

4. Keyboard

To test the rubber keys. Press a key and the result will be shown on the LCD display. Note

that the FN key should be used in conjunction with numeral keys.

5. Memory

To test the data memory (SRAM). Note after the test, the contents of the memory space will

be wiped out.

4. Memory

Size Information

Information includes sizes of the base memory (SRAM), memory card (SRAM) and

program memory (FLASH) in the unit of kilobytes.

2. Initialize

To initialize the data memory (SRAM). Note the contents of the data space will be wiped

out after memory initialization.

5. Power

Show the voltages of the main battery and backup battery.

6. Load Application

To download the application program, BASIC run-time or font file. There are three interfaces

supported by the system, namely, the Direct-RS232, Cradle-IR and standard IrDA.

7. Bluetooth Menu

This item will be shown only if the Bluetooth module is installed. The Bluetooth menu includes

the following items:

1. Information

2. IP Setting

3. BNEP Setting