Accurate Technology ProScale 사용자 설명서 - 페이지 7
{카테고리_이름} Accurate Technology ProScale에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology ProScale 20 페이지. Flush mount readouts
Accurate Technology ProScale에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄S
2
ECTION
The ProScale RF receiver is simple to install and connect to a PC.
1. Connect the low voltage DC power supply (provided) to the rear of
the receiver. Plug the power supply into an AC outlet. The top
green LED on the front of the receiver will illuminate.
2. Connect the male (pin) end of the DB-9 serial cable (provided) to
the rear of the receiver. Connect the female (socket) end to the PC
serial port. Note: If using a newer laptop computer, there may be
no RS-232 port installed on your PC.
recommended that you purchase a USB/Serial adapter from your
local office supply store.
3. Set the receiver in a location that is centrally located to receive
signals from your ProScale display(s). Do not place the receiver
next to large metal objects such as a filing cabinet as this may
significantly reduce the receiving range.
Accurate Technology Inc.
Serial Connection
Power
Indicator
Valid Data
Received
I
NSTALLATION
In this case, it is
Power
Connection
Page 7 of 20