Accurate Technology TERN2 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Accurate Technology TERN2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology TERN2 12 페이지.

TERN2

Class 5 A . B . E . C . bearings in the Tern2 are Teflon impregnated in the ball bearing race, no lubrication is needed for these

bearings .

Rinse your Tern2 with a fine spray of freshwater with reel in tighten drag position . Do not use heavy spray pressure as it

might force saltwater into reel . Do not completely submerge the reel into water . Wipe the exterior of the reel with a clean,

soft towel . If reel is on rod gently tap bottom of the rod on ground and wind reel quickly to get any excess water out .

Let reel dry out then take drag and loosen it as it still has a light drag, hold spool in position and turn handle around in

full circle a couple times . This will break all parts of reels apart that might have been affected by any salt sitting on it .

Maintenance

Once done you can lubricate reel at tension knob, lever, and Star Drag with a drop or two of reel lube included in box .

You can find a video on Accurate's YouTube channel under reel maintenance if you need any further help .

Periodically check all exterior screws to make sure they are tight .

We recommend yearly maintenance of your Tern2 with a service professional . Preventative maintenance will prolong life

of reel and make sure it is ready to catch the following season .

When storing reel back off drag and store with clicker in on position .

Drop of Oil on

Oil

Threads of knob

Oil

Engagement

Lever,

Grease

or Oil

Grease Torx Screws