Accurate Technology TWINSPIN REEL SR-50 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Accurate Technology TWINSPIN REEL SR-50에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology TWINSPIN REEL SR-50 5 페이지.

SPOOL

ASSEMBLY

.035"

.040"

Thick

FILLING

THE SPOOL

ROD

MOUNTING

pursuetheoutdoors.com/schematics

CARBON FIBER

TITANIUM FRICTION WASHER

Begin filling the

Reel by attaching the line securely to the reel spool. With tension applied to the line, fill the spool to

WIN

approximately 1/4" from the spool edge. .

Because of mono bold compaction when using ultra light line, we recommend first filling the spool with at least 2/3 dacron line.

(Mono compaction is a problem that occurs with light line. The smaller the mono line diameter, the more elasticity the line will have.

The elasticity is multiplied by the amount of line put on the spool which creates pressure on the spool. When too much light line is

added, the pressure can expand the spool. This can cause the reel to perform with inconsistent drag pressure or, if enough

pressure is built up, break the spool in half. Always put the least amount of ultra-light line on the reel as needed.)

Mount the reel to a rod with an aluminum or

re-inforced reel seat. Make sure the reel

base is securely clamped down in the reel

seat. Check to see if the reel moves in the

reel seat when attached.

BEARINGS

Reel Seat

SPOOL SHIMS

These shims are used to

move the position of the

spool for proper line lay.

Reel Base